Home >> End Mills >> Die and Mold

Die and Mold

EM Die Mold Long Reach
THS016225
 
END MILL OD=( 1/ 8)" FLUTES 2 LOC=( 1/ 2)" OAL=( 4)" DIE MOLD LONG BALL NOSE COATED
THS016226
 
END MILL OD=( 1/ 8)" FLUTES 4 LOC=( 1/ 2)" OAL=( 4)" DIE MOLD LONG BALL NOSE COATED
THS016227
 
END MILL OD=( 3/16)" FLUTES 2 LOC=( 1/ 2)" OAL=( 4)" DIE MOLD LONG BALL NOSE COATED
THS016228
 
END MILL OD=( 3/16)" FLUTES 4 LOC=( 1/ 2)" OAL=( 4)" DIE MOLD LONG BALL NOSE COATED
THS016229
 
END MILL OD=( 1/ 4)" FLUTES 2 LOC=( 3/ 4)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016230
 
END MILL OD=( 1/ 4)" FLUTES 4 LOC=( 3/ 4)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016231
 
END MILL OD=( 5/16)" FLUTES 2 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016232
 
END MILL OD=( 5/16)" FLUTES 4 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016233
 
END MILL OD=( 3/ 8)" FLUTES 2 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016234
 
END MILL OD=( 3/ 8)" FLUTES 4 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016235
 
END MILL OD=( 1/ 2)" FLUTES 2 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016236
 
END MILL OD=( 1/ 2)" FLUTES 4 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016237
 
END MILL OD=( 5/ 8)" FLUTES 2 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016238
 
END MILL OD=( 5/ 8)" FLUTES 4 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016239
 
END MILL OD=( 3/ 4)" FLUTES 2 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
THS016240
 
END MILL OD=( 3/ 4)" FLUTES 4 LOC=( 1)" OAL=( 6)" DIE MOLD LONG BALL NOSE COATED
EM Die Mold Series
THS016241
 
END MILL OD=( 1/32)" FLUTES 2 LOC=( 1/32)" OAL=( 3)" SHANK OD=( 1/ 4)" 5 DEG BALLNOSE COAT
THS016242
 
END MILL OD= 1 mm FLUTES 2 LOC= 1 mm OAL=75 mm SHANK OD= 6 mm 5 DEG BALL NOSE COATED
THS016243
 
END MILL OD= 1.5 mm FLUTES 2 LOC= 1.5 mm OAL=75 mm SHANK OD= 6 mm 5 DEG BALL NOSE COATED
THS016244
 
END MILL OD=( 1/16)" FLUTES 2 LOC=( 1/16)" OAL=( 3)" SHANK OD=( 1/ 4)" 5 DEG BALLNOSE COAT
THS016245
 
END MILL OD= 2 mm FLUTES 2 LOC= 2 mm OAL=75 mm SHANK OD= 6 mm 5 DEG BALL NOSE COATED
THS016246
 
END MILL OD=( 3/32)" FLUTES 2 LOC=( 3/32)" OAL=( 3)" SHANK OD=( 1/ 4)" 5 DEG BALLNOSE COAT
THS016247
 
END MILL OD= 3 mm FLUTES 2 LOC= 3 mm OAL=75 mm SHANK OD= 6 mm 5 DEG BALL NOSE COATED
THS016248
 
END MILL OD=( 1/ 8)" FLUTES 2 LOC=( 1/ 8)" OAL=( 3)" SHANK OD=( 1/ 4)" 5 DEG BALLNOSE COAT
THS016249
 
END MILL OD= 4 mm FLUTES 2 LOC= 4 mm OAL=75 mm SHANK OD= 6 mm 5 DEG BALL NOSE COATED
THS016250
 
END MILL OD=( 3/16)" FLUTES 2 LOC=( 3/16)" OAL=( 3)" SHANK OD=( 1/ 4)" 5 DEG BALLNOSE COAT
THS016251
 
END MILL OD= 5 mm FLUTES 2 LOC= 5 mm OAL=75 mm SHANK OD= 6 mm 5 DEG BALL NOSE COATED
THS016252
 
END MILL OD= 6 mm FLUTES 2 LOC= 6 mm OAL=75 mm SHANK OD= 6 mm BALL NOSE COATED
THS016253
 
END MILL OD=( 1/ 4)" FLUTES 2 LOC=( 1/ 4)" OAL=( 3)" SHANK OD=( 1/ 4)" BALL NOSE COATED
THS016254
 
END MILL OD=( 5/16)" FLUTES 2 LOC=( 5/16)" OAL=( 4)" SHANK OD=( 5/16)" BALL NOSE COATED
THS016255
 
END MILL OD= 8 mm FLUTES 2 LOC= 8 mm OAL=100 mm SHANK OD= 8 mm BALL NOSE COATED
THS016256
 
END MILL OD=( 3/ 8)" FLUTES 2 LOC=( 3/ 8)" OAL=( 4)" SHANK OD=( 3/ 8)" BALL NOSE COATED
THS016257
 
END MILL OD=10 mm FLUTES 2 LOC=10 mm OAL=100 mm SHANK OD=10 mm BALL NOSE COATED
THS016258
 
END MILL OD=12 mm FLUTES 2 LOC=12 mm OAL=100 mm SHANK OD=12 mm BALL NOSE COATED
THS016259
 
END MILL OD=( 1/ 2)" FLUTES 2 LOC=( 1/ 2)" OAL=( 4)" SHANK OD=( 1/ 2)" BALL NOSE COATED
THS016260
 
END MILL OD= 2 mm FLUTES 2 LOC= 3 mm OAL= 50 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016261
 
END MILL OD= 2 mm FLUTES 4 LOC= 3 mm OAL= 50 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016262
 
END MILL OD= 2 mm FLUTES 2 LOC= 3 mm OAL= 60 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016263
 
END MILL OD= 2 mm FLUTES 4 LOC= 3 mm OAL= 60 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016264
 
END MILL OD= 2 mm FLUTES 2 LOC= 3 mm OAL= 65 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016265
 
END MILL OD= 2 mm FLUTES 4 LOC= 3 mm OAL= 65 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016266
 
END MILL OD= 3 mm FLUTES 2 LOC= 4 mm OAL= 60 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016267
 
END MILL OD= 3 mm FLUTES 4 LOC= 4 mm OAL= 60 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016268
 
END MILL OD= 3 mm FLUTES 2 LOC= 4 mm OAL= 65 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016269
 
END MILL OD= 3 mm FLUTES 4 LOC= 4 mm OAL= 65 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016270
 
END MILL OD= 3 mm FLUTES 2 LOC= 4 mm OAL= 70 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016271
 
END MILL OD= 3 mm FLUTES 4 LOC= 4 mm OAL= 70 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016272
 
END MILL OD= 4 mm FLUTES 2 LOC= 5 mm OAL= 50 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016273
 
END MILL OD= 4 mm FLUTES 4 LOC= 5 mm OAL= 50 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016274
 
END MILL OD= 4 mm FLUTES 2 LOC= 5 mm OAL= 65 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016275
 
END MILL OD= 4 mm FLUTES 4 LOC= 5 mm OAL= 65 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016276
 
END MILL OD= 4 mm FLUTES 2 LOC= 5 mm OAL= 80 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016277
 
END MILL OD= 4 mm FLUTES 4 LOC= 5 mm OAL= 80 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016278
 
END MILL OD= 4 mm FLUTES 2 LOC= 5 mm OAL= 50 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016279
 
END MILL OD= 4 mm FLUTES 4 LOC= 5 mm OAL= 50 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016280
 
END MILL OD= 4 mm FLUTES 2 LOC= 5 mm OAL= 65 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016281
 
END MILL OD= 4 mm FLUTES 4 LOC= 5 mm OAL= 65 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016282
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL= 60 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016283
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL= 60 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016284
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL= 80 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016285
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL= 80 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016286
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL=100 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016287
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL=100 mm SHANK OD= 6 mm R=0.5 mm DIE MOLD
THS016288
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL= 60 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016289
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL= 60 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016290
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL= 80 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016291
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL= 80 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016292
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL=100 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016293
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL=100 mm SHANK OD= 6 mm R=1.0 mm DIE MOLD
THS016294
 
END MILL OD= 6 mm FLUTES 2 LOC= 8 mm OAL=100 mm SHANK OD= 6 mm R=1.5 mm DIE MOLD
THS016295
 
END MILL OD= 6 mm FLUTES 4 LOC= 8 mm OAL=100 mm SHANK OD= 6 mm R=1.5 mm DIE MOLD
THS016296
 
END MILL OD= 8 mm FLUTES 2 LOC=10 mm OAL=100 mm SHANK OD= 8 mm R=0.5 mm DIE MOLD
THS016297
 
END MILL OD= 8 mm FLUTES 4 LOC=10 mm OAL=100 mm SHANK OD= 8 mm R=0.5 mm DIE MOLD
THS016298
 
END MILL OD= 8 mm FLUTES 2 LOC=10 mm OAL=100 mm SHANK OD= 8 mm R=1.0 mm DIE MOLD
THS016299
 
END MILL OD= 8 mm FLUTES 4 LOC=10 mm OAL=100 mm SHANK OD= 8 mm R=1.0 mm DIE MOLD
THS016300
 
END MILL OD= 8 mm FLUTES 2 LOC=10 mm OAL=100 mm SHANK OD= 8 mm R=2.0 mm DIE MOLD
THS016301
 
END MILL OD= 8 mm FLUTES 4 LOC=10 mm OAL=100 mm SHANK OD= 8 mm R=2.0 mm DIE MOLD
THS016302
 
END MILL OD=10 mm FLUTES 2 LOC=12 mm OAL=100 mm SHANK OD=10 mm R=1.0 mm DIE MOLD
THS016303
 
END MILL OD=10 mm FLUTES 4 LOC=12 mm OAL=100 mm SHANK OD=10 mm R=1.0 mm DIE MOLD
THS016304
 
END MILL OD=10 mm FLUTES 2 LOC=12 mm OAL=100 mm SHANK OD=10 mm R=2.0 mm DIE MOLD
THS016305
 
END MILL OD=10 mm FLUTES 4 LOC=12 mm OAL=100 mm SHANK OD=10 mm R=2.0 mm DIE MOLD
THS016306
 
END MILL OD=12 mm FLUTES 2 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=1.0 mm DIE MOLD
THS016307
 
END MILL OD=12 mm FLUTES 4 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=1.0 mm DIE MOLD
THS016308
 
END MILL OD=12 mm FLUTES 2 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=1.5 mm DIE MOLD
THS016309
 
END MILL OD=12 mm FLUTES 4 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=1.5 mm DIE MOLD
THS016310
 
END MILL OD=12 mm FLUTES 2 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=2.0 mm DIE MOLD
THS016311
 
END MILL OD=12 mm FLUTES 4 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=2.0 mm DIE MOLD
THS016312
 
END MILL OD=12 mm FLUTES 2 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=3.0 mm DIE MOLD
THS016313
 
END MILL OD=12 mm FLUTES 4 LOC=14 mm OAL=110 mm SHANK OD=12 mm R=3.0 mm DIE MOLD
We use cookies on this website to improve functionality and performance, maintain users accounts, to analyse traffic to the website and to enable social media features.
To learn more please see our Customer Service page for Privacy and Cookies Policy.
Accept cookies