Home >> Lathes >> TOPTURN >> TOPTURN CNC-S100CY TBMA-320 TURRET VDI60 SPUR-MT TURRET

TOPTURN CNC-S100CY TBMA-320 TURRET VDI60 SPUR-MT TURRET


TOPTURN CNC-S100CY TBMA-320 TURRET VDI60 SPUR-MT

Tool holders for TOPTURN CNC-S100CY TBMA-320 TURRET VDI60 SPUR-MT.We will find a tool holder for TOPTURN CNC-S100CY TBMA-320 TURRET VDI60 SPUR-MT.

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=32 mm L=60 mm

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=32 mm L=60 mm

VDI60 FORM A1 BLANK H=165 mm L=160 mm

VDI60 FORM A1 BLANK H=165 mm L=160 mm

VDI60 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B1 TURNING HOLDER RIGHT SHORT H=32 mm L=60 mm

VDI60 FORM B1 TURNING HOLDER RIGHT SHORT H=32 mm L=60 mm

VDI60 FORM B2 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B2 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B2 TURNING HOLDER LEFT SHORT H=32 mm L=60 mm

VDI60 FORM B2 TURNING HOLDER LEFT SHORT H=32 mm L=60 mm

VDI60 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B3 TURNING HOLDER RIGHT SHORT H=32 mm L=60 mm

VDI60 FORM B3 TURNING HOLDER RIGHT SHORT H=32 mm L=60 mm

VDI60 FORM B4 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B4 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B5 TURNING HOLDER RIGHT LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B5 TURNING HOLDER RIGHT LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B5 TURNING HOLDER RIGHT LONG H=30 mm L=60 mm

VDI60 FORM B5 TURNING HOLDER RIGHT LONG H=30 mm L=60 mm

VDI60 FORM B6 TURNING HOLDER LEFT LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B6 TURNING HOLDER LEFT LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B6 TURNING HOLDER LEFT LONG H=32 mm L=60 mm

VDI60 FORM B6 TURNING HOLDER LEFT LONG H=32 mm L=60 mm

VDI60 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=32 mm L=60 mm

VDI60 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=32 mm L=60 mm

VDI60 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1- 1/ 4)" L=60 mm

VDI60 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=32 mm L=60 mm

VDI60 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=32 mm L=60 mm

VDI60 FORM C1 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=125 mm

VDI60 FORM C1 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=125 mm

VDI60 FORM C1 TURNING HOLDER RIGHT H=32 mm L=62.5 mm

VDI60 FORM C1 TURNING HOLDER RIGHT H=32 mm L=62.5 mm

VDI60 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=135 mm

VDI60 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=135 mm

VDI60 FORM C2 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=63 mm

VDI60 FORM C2 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=63 mm

VDI60 FORM C2 TURNING HOLDER LEFT H=32 mm L=62.5 mm

VDI60 FORM C2 TURNING HOLDER LEFT H=32 mm L=62.5 mm

VDI60 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm L=135 mm

VDI60 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm L=135 mm

VDI60 FORM C3 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=63 mm

VDI60 FORM C3 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=63 mm

VDI60 FORM C3 TURNING HOLDER RIGHT H=32 mm L=62.5 mm

VDI60 FORM C3 TURNING HOLDER RIGHT H=32 mm L=62.5 mm

VDI60 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=135 mm

VDI60 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=135 mm

VDI60 FORM C4 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=63 mm

VDI60 FORM C4 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=63 mm

VDI60 FORM C4 TURNING HOLDER LEFT H=32 mm L=62.5 mm

VDI60 FORM C4 TURNING HOLDER LEFT H=32 mm L=62.5 mm

VDI60 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=135 mm

VDI60 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm L=135 mm

VDI60 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm L=135 mm

VDI60 FORM D1 TRIPLE TURNING HOLDER H=32 mm L=110 mm

VDI60 FORM D1 TRIPLE TURNING HOLDER H=32 mm L=110 mm

VDI60 FORM D1 TRIPLE TURNING HOLDER ID=( 1- 1/ 4)" L=110 mm

VDI60 FORM D1 TRIPLE TURNING HOLDER ID=( 1- 1/ 4)" L=110 mm

VDI60 FORM D2 TRIPLE TURNING HOLDER H=32 mm L=110 mm

VDI60 FORM D2 TRIPLE TURNING HOLDER H=32 mm L=110 mm

VDI60 FORM D2 TRIPLE TURNING HOLDER ID=( 1- 1/ 4)" L=110 mm

VDI60 FORM D2 TRIPLE TURNING HOLDER ID=( 1- 1/ 4)" L=110 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 2)" L=100 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 2)" L=100 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=10 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=10 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=12 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=12 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=16 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=16 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=20 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=20 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=25 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=25 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=32 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=32 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=40 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=40 mm L=90 mm

VDI60 FORM E2 BORING BAR HOLDER ID=50 mm L=100 mm

VDI60 FORM E2 BORING BAR HOLDER ID=50 mm L=100 mm

VDI60 FORM F MORSE TAPER MT2 ADAPTER L=32 mm

VDI60 FORM F MORSE TAPER MT2 ADAPTER L=32 mm

VDI60 FORM F MORSE TAPER MT3 ADAPTER L=44 mm

VDI60 FORM F MORSE TAPER MT3 ADAPTER L=44 mm

VDI60 FORM F MORSE TAPER MT4 ADAPTER L=50 mm

VDI60 FORM F MORSE TAPER MT4 ADAPTER L=50 mm

VDI60 FORM F MORSE TAPER MT5 ADAPTER L=81 mm

VDI60 FORM F MORSE TAPER MT5 ADAPTER L=81 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=( 2- 3/ 8)" L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=( 2- 3/ 8)" L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=60 mm L=100 mm

VDI60 FORM T1 RADIAL BORING BAR HOLDER ID=60 mm L=100 mm

VDI60 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI60 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI60 KEYLESS DRILL CHUCK ID=16 mm L=90 mm

VDI60 KEYLESS DRILL CHUCK ID=16 mm L=90 mm

VDI60 SPUR-MT AXIAL DRILLING MILLING HEAD ER50 L=140 mm

VDI60 SPUR-MT AXIAL DRILLING MILLING HEAD ER50 L=140 mm

VDI60 SPUR-MT AXIAL DRILLING MILLING HEAD ER50 OFFSET L= 65 mm

VDI60 SPUR-MT AXIAL DRILLING MILLING HEAD ER50 OFFSET L= 65 mm

VDI60 SPUR-MT AXIAL DRILLING MILLING HEAD ER50 OFFSET L= 80 mm

VDI60 SPUR-MT AXIAL DRILLING MILLING HEAD ER50 OFFSET L= 80 mm

VDI60 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER50 L=106 mm BACK SET 83mm

VDI60 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER50 L=106 mm BACK SET 83mm

VDI60 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER50 L=106 mm BACK SET 83mm

VDI60 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER50 L=106 mm BACK SET 83mm

VDI60 SPUR-MT RADIAL TAPPING HEAD ER32 L=106 mm BACK SET 83 mm LEFT HAND CW-CW

VDI60 SPUR-MT RADIAL TAPPING HEAD ER32 L=106 mm BACK SET 83 mm LEFT HAND CW-CW

VDI60 SPUR-MT RADIAL TAPPING HEAD ER32 L=106 mm BACK SET 83 mm RIGHT HAND CW-CW

VDI60 SPUR-MT RADIAL TAPPING HEAD ER32 L=106 mm BACK SET 83 mm RIGHT HAND CW-CW

VDI60 TEST BAR X-AXIS L=100 mm

VDI60 TEST BAR X-AXIS L=100 mm

VDI60 TEST BAR Z AXIS L=180 mm

VDI60 TEST BAR Z AXIS L=180 mm

Not found?

Give us more details about your machine

* Fields are required



We use cookies on this website to improve functionality and performance, maintain users accounts, to analyse traffic to the website and to enable social media features.
To learn more please see our Customer Service page for Privacy and Cookies Policy.
Accept cookies