Home >> Lathes >> MILLTRONICS >> MILLTRONICS ML-40-80 TURRET BARUFFALDI VDI50 SPUR-MT TURRET

MILLTRONICS ML-40-80 TURRET BARUFFALDI VDI50 SPUR-MT TURRET


MILLTRONICS ML-40-80 TURRET BARUFFALDI VDI50 SPUR-MT

Tool holders for MILLTRONICS ML-40-80 TURRET BARUFFALDI VDI50 SPUR-MT.We will find a tool holder for MILLTRONICS ML-40-80 TURRET BARUFFALDI VDI50 SPUR-MT.

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

In Stock 10

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=32 mm L=55 mm

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=32 mm L=55 mm

In Stock 10

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=32 mm OR 25 mm L=55 mm

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=32 mm OR 25 mm L=55 mm

In Stock 10

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=32 mm L=55 mm

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=32 mm L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=32 mm L=55 mm

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=32 mm L=55 mm

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM C1 TURNING HOLDER RIGHT H=32 mm L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=32 mm L=50 mm

In Stock 10

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

In Stock 10

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

In Stock 10

VDI50 FORM D1 TRIPLE TURNING HOLDER H=32 mm OR 25 mm L=85 mm

VDI50 FORM D1 TRIPLE TURNING HOLDER H=32 mm OR 25 mm L=85 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

VDI50 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=25 mm L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=25 mm L=80 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=32 mm L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=32 mm L=80 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=40 mm L=90 mm

VDI50 FORM E1 U-DRILL HOLDER ID=40 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=10 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=10 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=12 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=12 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=16 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=16 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=20 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=20 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=25 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=25 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=32 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=32 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=40 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=40 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=50 mm L=95 mm

VDI50 FORM E2 BORING BAR HOLDER ID=50 mm L=95 mm

In Stock 10

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

In Stock 6

VDI50 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=90 mm

In Stock 6

VDI50 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=90 mm

In Stock 6

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

In Stock 5

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

In Stock 5

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

In Stock 5

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=100 mm

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=100 mm

In Stock 5

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

In Stock 4

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

In Stock 4

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=100 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=100 mm

In Stock 4

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

In Stock 3

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

In Stock 3

VDI50 FORM C3 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=50 mm

VDI50 FORM C3 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=50 mm

In Stock 3

VDI50 FORM A1 BLANK H=160 mm L=125 mm

VDI50 FORM A1 BLANK H=160 mm L=125 mm

In Stock 2

VDI50 FORM C4 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM C4 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

In Stock 2

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=80 mm

In Stock 2

VDI50 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

In Stock 2

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

In Stock 1

VDI50 FORM C4 TURNING HOLDER LEFT H=32 mm or 25 mm L=55 mm

VDI50 FORM C4 TURNING HOLDER LEFT H=32 mm or 25 mm L=55 mm

In Stock 1

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG SQUARE H=( 1- 1/ 4)" L=55 mm UNDERCUT

VDI50 FORM B6 TURNING HOLDER LEFT LONG SQUARE H=( 1- 1/ 4)" L=55 mm UNDERCUT

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1)" L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1)" L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=25 mm L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=25 mm L=50 mm

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=32 mm L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=32 mm L=55 mm

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C3 TURNING HOLDER RIGHT H=32 mm OR 25 mm L=50 mm

VDI50 FORM C3 TURNING HOLDER RIGHT H=32 mm OR 25 mm L=50 mm

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

VDI50 FORM D1 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D1 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D2 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D2 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D2 TURNING HOLDER H=32 mm L=85 mm

VDI50 FORM D2 TURNING HOLDER H=32 mm L=85 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1)" L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1)" L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=100 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=100 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" L=95 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" L=95 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=30 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=30 mm L=90 mm

VDI50 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI50 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI50 FORM E3 COLLET CHUCK OZ32 mm L=90 mm

VDI50 FORM E3 COLLET CHUCK OZ32 mm L=90 mm

VDI50 FORM E4 COLLET CHUCK ER40 L=75 mm

VDI50 FORM E4 COLLET CHUCK ER40 L=75 mm

VDI50 FORM F MORSE TAPER MT2 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT2 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT3 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT3 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT4 ADAPTER L=50 mm

VDI50 FORM F MORSE TAPER MT4 ADAPTER L=50 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=100 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=100 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=145 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=145 mm

VDI50 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI50 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI50 KEYLESS DRILL CHUCK ID=16 mm L=90 mm

VDI50 KEYLESS DRILL CHUCK ID=16 mm L=90 mm

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CW

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 L=123 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 L=123 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 OFFSET L= 65 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 OFFSET L= 65 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 22 mm L=117 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 22 mm L=117 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 27 mm L=123 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 27 mm L=123 mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=90mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=90mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=90 mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=90 mm BACK SET 49mm

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm LEFT HAND CW-CW

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm LEFT HAND CW-CW

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm RIGHT HAND CW-CW

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm RIGHT HAND CW-CW

VDI50 TEST BAR X AXIS L=100 mm

VDI50 TEST BAR X AXIS L=100 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=150 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=150 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=200 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=200 mm

VDI50 TEST BAR Z AXIS OD=50 mm L=115 mm

VDI50 TEST BAR Z AXIS OD=50 mm L=115 mm

Not found?

Give us more details about your machine

* Fields are required



We use cookies on this website to improve functionality and performance, maintain users accounts, to analyse traffic to the website and to enable social media features.
To learn more please see our Customer Service page for Privacy and Cookies Policy.
Accept cookies